Skip to content
Monitor Radar

Updated Nov 6, 2026

Updated Nov 6, 2026

Monitor for PS5 and Xbox: the Hz, resolution and ports that matter

What the console delivers and what the spec sheet confirms.

Which monitor works for the PS5 and the Xbox?

See what to check in the specs

Step 1 of 4

What the console delivers over HDMI

Up to 120 Hz, in three resolutions.

The PS5 and Xbox Series reach 120 Hz at Full HD, at 1440p (QHD) and at 4K, over the HDMIport, as long as the game and the monitor support it. Not every game reaches 120 frames per second: many run at 60, and for them the monitor’s extra Hz don’t show. 4K at 120 Hz usually calls for the HDMI 2.1, and the port version is rarely listed in the store’s spec sheet.

That’s why the Radar confirms what the spec sheet says (Hz, resolution, number of HDMI ports) and doesn’t claim that a model runs at 120 Hz on your console. Before buying, check the manufacturer’s manual for the HDMI version and the rate supported at each resolution.

Step 2 of 4

What to check in the specs

Hz, size, HDMI and sync.

The Radar’s rule for this use is 120 Hz or more, 25″ to 32″. It’s an editorial rule, not a test. In the specs, check four things:

  1. Hz: 120 Hz or more, for games that reach 120 frames.
  2. HDMI ports: the console uses HDMI, not DisplayPort. If you have a console and a computer, the spec sheet needs to list both ports.
  3. Size: 25″ to 32″ covers the desk and the small room. The farther away you sit, the more the bigger size helps.
  4. Sync: VRR (variable refresh rate) and FreeSync or G-Sync appear in the specs of some models and keep up with frame rate swings. In today’s catalog, 80 monitors that pass this rule have the sync in the specs.

Step 3 of 4

What passes the rule today

Median price by resolution.

This table shows, among the monitors that pass the console rule, how many there are at each resolution and their median price.

How many monitors pass the console rule and the median price of each resolution, in today’s catalog
ResolutionMonitorsMedian priceMedian size
Full HD57$130.0027″
QHD (1440p)66$250.0027″
4K32$743.0027″

Catalog of 06/11/2026. A resolution with fewer than 3 monitors doesn’t appear. The groups also differ in panel and brand.

162 of the 415 monitors in the catalog pass this rule. Their median price is $220.00 and the spec score median is 4.4. The cheapest:

See these monitors on the Radar of Monitors

Step 4 of 4

Which resolution for the console

Cheap Full HD, balanced QHD, 4K if it fits.

At 25″ to 27″, QHD is the Radar’s balance point for sharpness, and Full HD is the cheapest option. 4K makes more of a difference at 28″ or more and in games that run well at that resolution, and the 4K with 120 Hz combination is the one that asks the most of HDMI. The resolution choice and the extra Hz have their own guide. For a use that combines computer and console, the main guide starts from the use.

How we read the console

  • 415monitors in the catalog
  • 06/11price date

The PS5 and Xbox Series reach 120 Hz over HDMI at Full HD, 1440p and 4K, when the game and the monitor support it. The spec sheet rarely gives the HDMI version, so the Radar confirms Hz, size and ports. Catalog of 06/11/2026: 415 monitors, median price of $224.00.

The parts of the console rule
Part of the ruleRule
Refresh rate120 Hz or more in the specs
Size25″ to 32″
PortHDMI; the version is rarely listed in the specs
Minimum monitors per resolution in the table3 for the resolution to appear

The best by price range

Next step

See the monitors that fit your criteria

Each point is a new monitor, by price and spec score.

Frequently asked questions

Which monitor should I buy for PS5?

Look in the specs for 120 Hz or more, 25″ to 32″, with an HDMI port. The PS5 reaches 120 Hz at Full HD, 1440p and 4K when the game supports it. The HDMI version is rarely listed in the specs, so check the manual. Check "Casual gaming and console" in "Help me choose" and the chart shows the models.

Which monitor should I buy for Xbox Series?

The rule is the same as for the PS5: 120 Hz or more, 25″ to 32″, with HDMI. The Xbox Series reaches 120 Hz at Full HD, 1440p and 4K when the game supports it. The Radar reads the spec sheet and doesn’t claim that a model runs at 120 Hz on your console.

Do I need HDMI 2.1 to play at 120 Hz?

For 4K at 120 Hz, you usually do. At Full HD and 1440p, 120 Hz may work over a simpler HDMI, depending on the monitor. The port version is rarely listed in the store’s spec sheet, so the way to go is to check the manufacturer’s manual.

Does a 60 Hz monitor work for a console?

It does, and the console runs games at 60 frames per second on it. The extra Hz only show up in games that reach 120 frames. If the budget is tight and you play 60-frame games, the 60 Hz monitor does the job.

A monitor or a big living room TV for the console?

A monitor fits on a desk, up close, and has Hz and response time stated in the spec sheet; a big living room TV helps people who sit far away. The Radar of Monitors only compares monitors and gives no opinion on other types of screens.

How much does a monitor for a console cost today?

It depends on the resolution. The Radar shows the median price of monitors that pass the console rule, 120 Hz or more and 25″ to 32″, in the 06/11/2026 catalog. Today there are 415 monitors in the catalog, from $63.00.

How do I read the chart?

Each dot is a new monitor. The further right, the more expensive; the higher up, the better the spec sheet score. The price uses a logarithmic scale: each step is worth more dollars than the one before, so the cheaper ones don’t get bunched together. The line connects the monitors that no other, among those filtered, beats on both score and price at once. Compare monitors of the same size: pick the inch range in the top bar.

Where does the score come from?

From the monitor’s spec sheet, with public weights (image, smoothness, connections, ergonomics and recency). The score compares within the type: the Hz of an office monitor are measured against the office yardstick, those of a gaming monitor against the gaming one. It shows what the spec sheet states, not the calibration or the measured brightness. Size doesn’t count toward the score. The full calculation is in How we calculate the score.

Why do some monitors appear without a score?

Because the store’s spec sheet doesn’t give enough information: we need at least three components of the score. We’d rather leave a monitor without a score than make one up. Those monitors stay off the chart and remain in the table, with the price and the button to compare stores.

How many inches do I need?

For a work desk, 24″ at Full HD and 27″ at QHD are the sizes where text looks sharp without scaling up. At 27″ Full HD the density drops to 82 pixels per inch and the text looks less defined; 32″ calls for QHD or 4K. Each monitor’s page shows the pixel density calculated by the Radar.

Is the price on the chart what I’ll pay?

This is the lowest price from Amazon.com, a direct store, the manufacturer’s official store or a seller rated 4.0 with 100 or more sales, usually paying upfront, on the date we checked. It changes without notice, and the color can change the price. The buy button goes straight to the store, where the price of the day applies.

Read next

Where the numbers come from

The console rule is an editorial rule by the Radar (RADARDEMONITORES.perfis, console use): 120 Hz or more and 25″ to 32″ in the specs. It is not a compatibility test: the Radar doesn’t turn on the console or the monitor and doesn’t claim that a model runs at 120 Hz. The numbers come from the check on 06/11/2026, with at least 3 monitors per resolution and 6 for the use block. The HDMI version is rarely listed in the specs and the Radar doesn’t infer it.

The guide helps you decide and doesn’t recommend a monitor for you: the final price is the one at the store, and the spec score doesn’t measure the real calibration or durability.

Data from Nov 6, 2026.